Download WinRAR 64-bit 5.80 for Windows. Fast downloads of the latest free software!
Web Backgrounds And Buttons by Vista-Buttons.com v2.27GSA High speed 3D camera ball tracking system
Camera Driver Installation
Installing the GSA ccCam Camera Drivers
ccCam cameras have digitally signed 32 bit & 64 bit drivers.
1. Connect your GSA Camera to a USB 2.0 port on your PC
If a Windows Driver message box opens :
2. Click “Install from a list or specific location” and click “Next”.
3. Select “Don’t search. I will choose the driver to install” and “Next”.
4. Click “Have Disk” and browse tothe CameraDrivers folder of where GSAControl Panel was installed. This is usually 'c:Program FilesGSAGolfInterfaceCameraDrivers'
5. For 64 bit Windows, select Windows64; for 32 bit Windows select Windows32.
(if you don't know if your OS is 32 bit or 64 bit go to the GSA Control Panel and select the Setup page. The Windows type will be displayed at the top right side of the screen)
7. Select either WindowsXP, WindowsVista or Windows 7 depending on which version of Windows you are using.
8. Select the camera model and click “Next”.
9. You will be prompted to continue installation - click “Continue Anyway” then “Finish” to complete installation
If a Windows Driver message box does not open:
1. Go to the Windows Device Manager.
(to get to the Windows Device Manager go the Windows Control Panel, click on Hardware and Sound and you will see the Device Manager link at the top right hand side of the screen)
2. Go to Other Devices
3. Right click on the USB 2.0 Digital Imaging Camera and select Update Driver
4. Select Browse my computer for driver software
5. Click the Browse button and navigate to the GSAControlPanel (usually installed in the Program Files folder on drive C:)
6. Navigate to the Camera Drivers folder and then to either Wondows 64 or Windows 32 (depending on what operating system type you have)
(if you don't know if your OS is 32 bit or 64 bit go to the GSA Control Panel and select the Setup page. The Windows type will be displayed at the top right side of the screen)
7. Click the Next button to install the camera driver
-
-
10. Start GSA Control Panel . You should see that the camera has been detected and that the camera engine is running
11. Go to the Camera Window of GSA Control Panel and test by selecting Video Mode or clicking the Soft Trigger button.